Inspection |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the floor console upper cover (A) using the appropriate tool. |
3. |
Remove the seat heater switch module (A).
|
4. |
Disconnect the driver and assist seat heater switch connector (A). |
5. |
Check that continuity exists between the terminals after turning the driver seat heater switch ON. |
6. |
Check that continuity exists between the terminals after turning the assist seat heater switch ON. |
7. |
If the switch fails to operate, replace the driver and assist seat heater switch (A). |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the power window switch from rear door trim.
(Refer to BE group - "Power window switch")
|
3. |
Turn 2nd seat heater switch ON and check that continuity exists between the terminals. |
4. |
If the switch fails to operate, replace the 2nd seat heater switch.
|
Hyundai Tucson (LM) 2010-2015 Service Manual: SS-A Solenoid Valve(ON/OFF) Specifications
Specifications
ON/OFF Solenoid Valve(SS-A, SS-B)
x Control type : Normal low type
Control pressure kpa (kgf/cmx, psi)490.33(5.0, 71.12) Internal resistance(x)10 ~ 11
...
Hyundai Tucson (LM) 2010-2015 Owners Manual: Tilting the Sunroof
Open the roller blind before opening and closing the sunroof.
To tilt the sunroof open:
Push the sunroof control lever upward until the sunroof moves to the desired
position.
To close the sunroof:
Pull the sunroof lever downward until the sunroof moves to the desired position.
WARNING
...