Hyundai Tucson: Seat Electrical / Seat Heater Repair procedures

Removal
1.
Remove the seat back cover and cushion cover.
(Refer to the BD group - "Front seat")
2.
Remove the driver / assist seat back heater (A) and cushion heater (B).

Installation
1.
Install the driver / assist seat back and cushion heater.
Inspection
First Seat Heater
1.
Check for continuity and measure the resistance between terminals as below.

No.
Description
No.
Description
1
High
3
GND
2
Low
4
Indicator


Standard value
Cushion : 1.32x ± 10% (leather), 1.76x ± 10% (fabric)
Back : 1.85x ± 10%
Set : 3.17x ± 10% (leather), 3.61x ± 10% (fabric)

2.
Operate the seat warmer after connecting the 4P connector, and then check the thermostat by measuring the temperature of seat surface.

Standard value
High : 107.6 ± 3.6°F (42 ± 2°C) (Cushion),
125.6 ± 3.6°F (52 ± 2°C) (Back)
Low : 104 ± 3.6°F (40 ± 2°C) (Cushion),
114.8 ± 3.6°F (46 ± 2°C) (Back)

Seat Heater Components and Components Location
Component Location ...

Fuses And Relays
...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Steering Gear box Repair procedures
Replacement 1. Remove the front wheel & tire. Tightening torque : 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)     Be careful not to damage to the hub bolts when removing the front wheel & tire. 2. Disconnect the stabilizer link (B) with the front ...

Hyundai Tucson (LM) 2010-2015 Service Manual: General Safety Information and Caution
Instructions When Handling Refrigerant 1. R-134a liquid refrigerant is highly volatile. A drop on the skin of your hand could result in localized frostbite. When handling the refrigerant, be sure to wear gloves. 2. It is standard practice to wear goggles or glasses to protect your eye ...

© 2010-2024 www.htmanual.net