Hyundai Tucson: Fuses And Relays / PDM Relay Box Repair procedures

Hyundai Tucson (LM) 2010-2015 Service Manual / Body Electrical System / Fuses And Relays / PDM Relay Box Repair procedures

Inspection

1.	Disconnect the negative (-) battery terminal.

2.	Remove the front seat heater switch. (Refer to BE group - "Seat heater switch")

3.	Remove the PDM relay box (A) after loosening the screws (2EA) and desconnecting the connector.

IG2 Relay

Check for continuity between the terminals.

1.	There should be continuity between the No.1 in the B and No.2 in the B terminals when power and ground are connected to the No.3 in the A and No.4 terminals in the A terminals.

2.	There should be no continuity between the No.1 in the B and No.2 terminals in the B terminals when power is disconnected.

IG1 Relay

Check for continuity between the terminals.

1.	There should be continuity between the No.7 in the A and No.8 in the A terminals when power and ground are connected to the No.3 in the A and No.10 terminals in the A terminals.

2.	There should be no continuity between the No.7 in the A and No.8 terminals in the A terminals when power is disconnected.

ACC Relays

Check for continuity between the terminals.

1.	There should be continuity between the No.7 in the A and No.6 in the A terminals when power and ground are connected to the No.1 in the A and No.3 terminals in the A terminals.

2.	There should be no continuity between the No.7 in the A and No.6 terminals in the A terminals when power is disconnected.

PDM Relay Box Description and Operation

Description The PDM relay is united with IG1, IG2 and ACC relays and installed beside the assist instrument panel. ...

Indicators And Gauges

...

Other information:

Hyundai Tucson (LM) 2010-2015 Owners Manual: Low tire pressure indicator
The low tire pressure indicator comes on for 3 seconds after the ignition switch is turned to the "ON" position. The low tire pressure indicator illuminates when one or more of your tires is significantly underinflated. The low tire pressure indicator will illuminate after it blinks for appr ...

Hyundai Tucson (LM) 2010-2015 Owners Manual: Air intake control
The air intake control button is used to select the outside (fresh) air position or recirculated air position. To change the air intake control position, push the control button. Recirculated air position The indicator light on the button illuminates when the recirculated air position i ...