Removal |
1. |
Disconnect the negative battery terminal. |
2. |
Remove the front door trim.
(Refer to the BD group - "Front door") |
3. |
Remove the screws from power window switch (A) and connectors (B).
[LHD]
[RHD] |
4. |
Remove the driver power window switch (A) from front door trim.
[LHD]
[RHD]
|
Installation |
1. |
Install the driver door module and connectors. |
2. |
Install the front door trim. |
Hyundai Tucson (LM) 2010-2015 Service Manual: In car sensor Repair procedures
Inspection
1.
Ignition "ON"
2.
Blow air with changing temperature to the in car sensor air inlet. Measure sensor resistance between 1 and 2 terminals.
1. Sensor Ground2. Incar Sensor Signal
Specification
Temperature [°C(°F)] Resistance between terminals 1and 2 (kx)-20(-4)290.21-10(1 ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Delivery Pipe Repair procedures
Removal
In case of removing the high pressure fuel pump, high
pressure fuel pipe, delivery pipe, and injector, there may be injury
caused by leakage of the high pressure fuel. So don’t do any repair
work right after engine stops.
1.
Turn the ignition switch OFF ...