Hyundai Tucson: Power Windows / Power Window Motor Repair procedures
| Inspection |
| 1. |
Remove (-) negative battery terminal. |
| 2. |
Remove the front door trim.
(Refer to the BD group - "Front door") |
| 3. |
Disconnect the connector from the motor.
(A : Safety, B : Standard)
|
| 4. |
Connect the motor terminals directly to battery voltage (12V)
and check that the motor operates smoothly. Next, reverse the polarity
and check that the motor operates smoothly in the reverse direction. If
the operation is abnormal, replace the motor.
[Standard]
|
| 5. |
Connect the terminal No. 2 and No. 3 to battery voltage (12V)
and check that the motor operates smoothly when connecting the
terminals below.
[Safety]
|
| 1. |
Remove (-) negative battery terminal. |
| 2. |
Remove the rear door trim.
(Refer to the BD group - "Rear door") |
| 3. |
Disconnect the connector from the motor.
|
| 4. |
Connect the motor terminals directly to battery voltage (12V)
and check that the motor operates smoothly. Next, reverse the polarity
and check that the motor operates smoothly in the reverse direction. If
the operation is abnormal, replace the motor.
|
Description and Operation
Operation
Function Of Safety Power Window
When all door (Front, Rear) power window auto-up switch is operated, safety function is activated.
1.
Safety function condition
When detect the force o ...
Power Window Switch Components and Components Location
Components
Power Window Main Switch
Passenger Power Window Switch
Rear Power Window Switch
...
Other information:
Hyundai Tucson (LM) 2010-2015 Service Manual: Body Side Moldings Repair procedures
Replacement
Roof Rack Replacement
•
When prying with a flat-tipped screwdriver, wrap it with
protective tape, and apply protective tape around the related parts, to
prevent damaged.
•
Put on gloves to protect your hands.
•
Take care not to scratch ...
Hyundai Tucson (LM) 2010-2015 Service Manual: SRS Control Module (SRSCM) Repair procedures
Removal
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least three minutes before beginning work.
3.
Disconnect the DAB, PAB, SAB, CAB and BPT connectors.
4.
Remove the floor console. (Refer to the Body group - console)
5.
Pu ...
