Hyundai Tucson: Lighting System / Room Lamp Repair procedures

Hyundai Tucson (LM) 2010-2015 Service Manual / Body Electrical System / Lighting System / Room Lamp Repair procedures

Inspection

1.	Remove the room lamp assembly connector (A) then check for continuity between terminals.

Removal

1.	Disconnect the negative (-) battery terminal.

Detach the lamp lens (A) from the room lamp with a flat-tip screwdriver.

Push the lens as shown arrow direction.

Take care not to damage the part (B).

3.	Loosen the fixing screw (2EA).

4.	Remove the room lamp assembly (A) after disconnecting the connector (B).

Installation

1.	Install the room lamp assembly after connecting the lamp connector.

2.	Install the lamp lens after assembling the bulb.

Head Lamps Repair procedures

Removal Head lamps become very hot during use; do not touch them or any attaching hardware immediately after they have been turned off. The headlamp b ...

Overhead Console Lamp Repair procedures

Inspection Remove the overhead console lamp assembly then check for continuity between terminals. If the continuity is not as specified, replace the map lamp switch.Removal 1. Disconnect th ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Special Service Tools
Special Service Tools Tool(Number and Name)IllustrationUseDeployment tool0957A-34100AAirbag deployment tool.Deployment adapter0957A-3Q100Use with deployment tool.(PAB, CAB, APT)Deployment adapter0957A-3F100Use with deployment tool.(SAB)Deployment adapter0957A-38500Use with deployment tool.(DAB, ...

Hyundai Tucson (LM) 2010-2015 Owners Manual: Recommended SAE viscosity number
CAUTION Always be sure to clean the area around any filler plug, drain plug, or dipstick before checking or draining any lubricant. This is especially important in dusty or sandy areas and when the vehicle is used on unpaved roads. Cleaning the plug and dipstick areas will prevent dirt and gr ...