Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the hazard lamp switch assembly.
(Refer to the BE group - "Audio head unit") |
3. |
Disconnect the hazard lamp switch connector (A). |
4. |
If the hazard lamp switch is not as specified, replace it carefully and take care not to damage the hook (A). |
Installation |
1. |
Connect the hazard switch connector. |
2. |
Install the hazard switch assembly. |
Inspection |
1. |
Operate the switch and check for continuity between terminals with an ohmmeter. |
Hyundai Tucson (LM) 2010-2015 Service Manual: CVVT Oil Control Valve (OCV) Description and Operation
Description
Continuous Variable Valve Timing (CVVT) system advances or
retards the valve timing of the intake and exhaust valve in accordance
with the ECM control signal which is calculated by the engine speed and
load.
By controlling CVVT, the valve over-lap or under-lap occurs,
which m ...
Hyundai Tucson (LM) 2010-2015 Owners Manual: Clock Settings
Press the key
Select [Clock] through
TUNE knob or
key
Select menu through
TUNE knob
Clock Settings
This menu is used to set the time. Select [Clock Settings]
Set through
TUNE knob
Press
TUNE knob
❈ Adjust the number currently in focus to ...