Inspection |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the crash pad lower panel.
(Refer to the BD group - "Crash pad") |
3. |
Remove the crash pad side switch assembly (A) as shown below picture.
|
4. |
Remove the rheostat switch (A) after disconnecting the connectors.
|
5. |
Operate the switch and check for continuity between terminals with an ohmmeter. |
Hyundai Tucson (LM) 2010-2015 Service Manual: Smart Parking Assist System Speaker Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to the BD group - "Crash pad")
3.
Remove the SPAS speaker (A) after disconnecting the connector and removing the nut.
Installation
1.
Install the SPAS speaker and crash pad lower pa ...
Hyundai Tucson (LM) 2010-2015 Service Manual: 4WD ECU Description and Operation
Description
4WD ECU processes signals from various sensors and determines
the current road and driving conditions. The ECU then utilizes this
information to implement precision control over the 4WD coupling's
multi-plate clutch and variably adjust the amount of torque delivered
tothe rear ...