Hyundai Tucson: Lighting System / High Mounted stop lamp Repair procedures
| Removal |
| High Mounted Stop Lamp |
| 1. |
Disconnect the negative (-) battery terminal. |
| 2. |
Remove the liftgate trim.
(Refer to the BD group - "Liftgate") |
| 3. |
Remove the spoiler.
(Refer to the BD group - "Liftgate") |
| 4. |
Remove the high mounted stop lamp assembly (A) after loosening the nuts and washer nozzle (B).
|
| Installation |
| 1. |
Install the high mounted stop lamp and washer nozzle. |
| 2. |
Install the spoiler and liftgate trim.
|
License Lamps Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the license lamp lens (B) by pressing the clip (A).
3.
Turn the license bulb socket (A) counterclockwise to remove the bu ...
Luggage Room Lamp Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the luggage room lamp (B) when prying the hole (A) with a flat-up screwdriver
3.
Remove the luggage room lamp bulb in cas ...
Other information:
Hyundai Tucson (LM) 2010-2015 Owners Manual: Air intake control
The air intake control button is used to select the outside (fresh) air position
or recirculated air position.
To change the air intake control position, push the control button.
Recirculated air position
The indicator light on the button illuminates when the recirculated air position
i ...
Hyundai Tucson (LM) 2010-2015 Owners Manual: AWD LOCK indicator (if equipped)
The AWD LOCK indicator light is illuminated when the AWD LOCK button is pushed.
The purpose of this AWD LOCK mode is to increase the drive power when driving on
wet pavement, snow-covered roads and/or off-road.The AWD LOCK indicator light is
turned off by pushing the button again.
CAUTION
...
