Hyundai Tucson: Smart Parking Assist System (SPAS) / Smart Parking Assist System Unit Repair procedures

Removal
   
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Put on gloves to protect your hands.
1.
Using a screwdriver or remover, then remove the crash pad passenger panel (A).
(Refer to the BD group - "Crash pad")

2.
Remove the SPAS unit (A) after removing the nuts (2EA) and disconnecting the connectors.

Installation
1.
Connect the connectors and install the SPAS unit (A).
2.
Install the crash pad passenger panel.
Inspection
1.
The SPAS (Smart Parking Assist System) can diagnose by using the GDS more quickly.
The SPAS communicates with the GDS and then reads the input/output value and drives the actuator.
2.
To diagnose the SPAS (Smart Parking Assist System) function, select the menu of model and SPAS.
3.
To consult the present input/output value of SPAS, "Current DATA". It provides information of SPAS input/output conditions.

4.
To perform compulsory operation on SPAS input factors, select "ACTUATION TEST".

5.
To check the DTC of the each module, select "DIAGNOSTIC TROUBLE CODES"

6.
After replacing the SPAS unit, perform the "SPAS Variant Coding" procedure with GDS.

Smart Parking Assist System Unit Components and Components Location
Component ...

Smart Parking Assist System Speaker Components and Components Location
Component ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Passenger Airbag (PAB) Module Repair procedures
Removal 1. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 2. Remove the glove box housing. (Refer to the Body group- crash pad). 3. Disconnect the passenger airbag connector and remove the PAB mounting bolt. 4. Remove the crash pad. ( ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Engine And Transaxle Assembly Repair procedures
Removal     • Use fender covers to avoid damaging painted surfaces. • To avoid damage, unplug the wiring connectors carefully while holding the connector portion.     • Mark all wiring and hoses to avoid misconnection. • To rele ...

© 2010-2024 www.htmanual.net