Hyundai Tucson: Heating, Ventilation and Air Conditioning / Air Conditioning System
- General Safety Information and Caution
- Description and Operation
- Repair procedures
- Components and Components Location
- Compressor Oil Repair procedures
- Refrigerant line Components and Components Location
- Refrigerant line Repair procedures
- Compressor Components and Components Location
- Compressor Repair procedures
- Condenser Components and Components Location
- Condenser Repair procedures
- Receiver-Drier Repair procedures
- A/C Pressure Transducer Components and Components Location
- A/C Pressure Transducer Description and Operation
- A/C Pressure Transducer Repair procedures
- Evaporator Temperature Sensor Description and Operation
- Evaporator Temperature Sensor Repair procedures
- In car sensor Description and Operation
- In car sensor Repair procedures
- Photo Sensor Description and Operation
- Photo Sensor Repair procedures
- Ambient Sensor Description and Operation
- Ambient Sensor Repair procedures
- Cluster Ion Generator Components and Components Location
- Cluster Ion Generator Description and Operation
- Cluster Ion Generator Repair procedures
Special Service Tools
Special Service Tools
Tool (Number and name)IllustrationUse09977-29000Disc & hub assembly bolt removerRemoval and installation of disc & hub assembly.
...
General Safety Information and Caution
Instructions
When Handling Refrigerant
1.
R-134a liquid refrigerant is highly volatile. A drop on the
skin of your hand could result in localized frostbite. When handling the
refrigerant, be ...
Other information:
Hyundai Tucson (LM) 2010-2015 Service Manual: Transaxle Control Module (TCM) Description and Operation
Description
Transaxle Control Module (TCM) is the automatic
transmission's brain. The module receives and processes signals from
various sensors and implements a wide range of transmission controls to
ensure optimal driving conditions for the driver.
TCM is programmed for optim ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Repair procedures
General Inspection
After or before servicing the EPS system, perform the
troubleshooting and test procedure as follows. Compare the system
condition with normal condition in the table below and if abnormal
symptom is detected, perform necessary remedy and inspection.
Test conditionNormal ...
