Hyundai Tucson: Air Conditioning System / Refrigerant line Repair procedures

Replacement
1.
Discharge refrigerant from refrigeration system.
2.
Replace faulty tube or hose.
   
Cap the open fittings immediately to keep moisture or dirt out of the system.
3.
Tighten joint of bolt or nut to specified torque.
   
Connections should not be torque tighter than the specified torque.
4.
Evacuate air in refrigeration system and charge system with refrigerant.

Specified amount : 550 ± 25g (19.4 ± 0.88)

5.
Inspect for leakage of refrigerant.
Using a gas leak detector, check for leakage of refrigerant.
6.
Inspect A/C operation.
Refrigerant line Components and Components Location
Component Location ...

Compressor Components and Components Location
Components 1. Bolt2. Disc & Hub Assembly 3. Retainer Ring (Pully) 4. Pully5. Retainer Ring (Field coil)6. Field Coil7. Compressor Assembly ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Special Service Tools
Special Service Tools Tools(Number and name)IllustrationUse09431-45100Oil seal installerInstallation of transfer case oil seal.(Right side)09473-3B100Oil seal installerInstallation of transfer case oil seal.(Both side) ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Ultrasonic Sensor Repair procedures
Removal 1. Remove the rear bumper. (Refer to the BD group - "Rear bumper") 2. Disconnect the sensor connector (A) inside the rear bumper. 3. Pull out the sensor (A) by opening the sensor holder (B) out. Installation 1. Connect the connector, and then reassemble the sensor. 2. I ...

© 2010-2024 www.htmanual.net