Hyundai Tucson: Blower / Intake Actuator Description and Operation

Description
1.
The intake actuator is located at the blower unit.
2.
It regulates the intake door by signal from control unit.
3.
Pressing the intake selection switch will shift between recirculation and fresh air modes.
Intake Actuator Components and Components Location
Component Location ...

Intake Actuator Repair procedures
Inspection 1. Ignition "OFF" 2. Disconnect the intake actuator connector. 3. Verify that the actuator operates to the recirculation position when connecting 12V to the terminal 3 and groun ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Rear Bumper Repair procedures
Replacement     • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage. • Take care not bend or scratch the cover and other parts. 1. After loosening the mounting screws, then re ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Specifications
Specifications Front Suspension ItemSpecificationSuspension typeMacPherson StrutShock absorberTypeGasH.P.D [High Perpormence Damper]Coil springFree Height [I.D. color]326.6 mm (12.64 in.) [Brown -Yellow]310.4 mm (12.60 in.) [Brown -Red]324.2 mm (11.59 in.) [Brown - Violet]331.4 mm (11.90 in.) ...

© 2010-2024 www.htmanual.net