Hyundai Tucson: Recommended lubricants and capacities / Recommended SAE viscosity number
CAUTION
Always be sure to clean the area around any filler plug, drain plug, or dipstick before checking or draining any lubricant. This is especially important in dusty or sandy areas and when the vehicle is used on unpaved roads. Cleaning the plug and dipstick areas will prevent dirt and grit from entering the engine and other mechanisms that could be damaged.
Engine oil viscosity (thickness) has an effect on fuel economy and cold weather operating (engine start and engine oil flowability). Lower viscosity engine oils can provide better fuel economy and cold weather performance, however, higher viscosity engine oils are required for satisfactory lubrication in hot weather.
Using oils of any viscosity other than those recommended could result in engine damage. When choosing an oil, consider the range of temperature your vehicle will be operated in before the next oil change. Proceed to select the recommended oil viscosity from the chart.
*1 For better fuel economy, it is recommended to use the engine oil of a viscosity grade SAE 5W-20 (API SM / ILSAC GF-4). However, if the engine oil is not available in your country, select the proper engine oil using the engine oil viscosity chart.
Recommended lubricants and capacities
To help achieve proper engine and powertrain performance and durability, use
only lubricants of the proper quality.
The correct lubricants also help promote engine efficiency that results in improv ...
Vehicle identification number (VIN)
The vehicle identification number (VIN) is the number used in registering your
car and in all legal matters pertaining to its ownership, etc.
The number is punched on the floor under the passenge ...
Other information:
Hyundai Tucson (LM) 2010-2015 Owners Manual: Headrest
The vehicle’s front and rear seats have adjustable headrests.The headrests provide
comfort for passengers, but more importantly they are designed to help protect passengers
from whiplash and other neck and spinal injuries during an accident, especially
in a rear impact collision.
WARNING
T ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Shift Lever Repair procedures
Removal
1.
Remove the center console.
(Refer to "Console" in BD group)
2.
Remove the snap pin (A) and the clip (B).
3.
Remove the clip (A) and then remove the shift cable assembly.
4.
Remove the shift lever assembly (A).
Tightening torque:
8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ...
