Hyundai Tucson: Cylinder Head Assembly / Cylinder Head Components and Components Location
| Components |
| 1. Fuel pump adaptor 2. Camshaft bearing cap 3. Camshaft front bearing cap 4. Exhaust camshaft 5. Intake camshaft 6. Exhaust CVVT assembly | 7. Intake CVVT assembly 8. Cam carrier 9. Cylinder head 10. Cylinder head gasket 11. Retainer lock 12. Retainer | 13. Valve spring 14. Valve stem seal 15. Valve 16. Swing arm 17. HLA (Hydraulic lash adjuster) |
Camshaft Repair procedures
Removal
Timing chain cover removal is not required for this procedure.
•
Use fender covers to avoid damaging painted surfaces.
•
To avoid damage, unplug the wir ...
Cylinder Head Repair procedures
Removal
Engine removal is not required for this procedure.
•
Use fender covers to avoid damaging painted surfaces.
•
To avoid damaging the cylinder head, wait un ...
Other information:
Hyundai Tucson (LM) 2010-2015 Owners Manual: Emergency towing
If towing is necessary, we recommend you have it done by an authorized HYUNDAI
dealer or a commercial tow truck service.
If towing service is not available in an emergency, your vehicle may be temporarily
towed using a cable or chain secured to the emergency towing hook at the front (or
rea ...
Hyundai Tucson (LM) 2010-2015 Service Manual: In car sensor Description and Operation
Description
1.
In-car air temperature sensor is located at the center facia lower panel.
2.
The sensor contains a thermistor which measures the
temperature of the inside. The signal decided by the resistance value
which changes in accordance with perceived inside temperature, is
delive ...
