Oil And Filter Replacement |
|
1. |
Park the car on level ground. |
2. |
Drain engine oil.
|
3. |
Replace the oil filter (A).
|
4. |
Install the oil drain plug with a new gasket.
|
5. |
Fill with new engine oil, after removing the engine oil level gauge.
|
6. |
Install the oil filler cap. |
7. |
Start engine and check for oil leaks and check the oil gauge or light for an indication of oil pressure. |
8. |
Recheck the engine oil level. |
Inspection |
1. |
Check the engine oil quality.
Check the oil deterioration, entry of water, discoloring of thinning. If the quality is visibly poor, replace the oil. |
2. |
Check the engine oil level.
After engine warm up stop the engine wait 5 minutes then
check the oil level. Oil level should be between the "L" and "F" marks
on the dipstick. If low check for leakage and add oil up to the "F"
mark.
|
- |
ACEA A5 or above/5W-30 |
- |
API SL, SM or above |
- |
ILSAC GF-3, GF4 or above |
- |
ACEA A3, A5 or above |
For best performance and maximum protection of all types of operation, select only those lubricants which :
|
Hyundai Tucson (LM) 2010-2015 Service Manual: Specifications
Specifications
ItemSpecificationsTransmission typeA6MF1Engine modelGasoline 2.0 GDITorque converter type3-element, 1-stage, 2-phase typeTorque converter sizeO236 mm (9.2913 in.)Oil pump systemParachoidFriction elementsClutch: 2EABrake: 3EAOWC : 1EAPlanetary gear 3EAGear ration1st4.1622nd2. ...
Hyundai Tucson (LM) 2010-2015 Owners Manual: Headlight welcome function
When the headlight switch is in the ON position or in the AUTO position and all
doors (and tailgate) are closed and locked, if you press the door unlock button
on the remote transmitter or smart key, the headlights will come on for about 15
seconds.
If the headlight switch is in the AUTO posi ...