Removal and Installation |
1. |
Remove the timing chain cover.
(Refer to Timing system in this group) |
2. |
Remove the oil pump cover (A).
|
3. |
Remove the inner rotor (A) and outer rotor (B). |
4. |
Installation is the reverse order of removal. |
Inspection |
1. |
Remove the relief plunger.
Remove the plug (A), spring (B) and relief plunger (C).
|
2. |
Inspect the relief plunger.
Coat the plunger with engine oil and check that it falls smoothly into the plunger hole by its own weight.
If necessary, replace timing chain cover. |
3. |
Inspect the relief valve spring.
Inspect for distortion or breakdown of the relief valve spring. |
4. |
Inspect the rotor side clearance.
Using a feeler gauge and precision straight edge, measure the clearance between the inner rotors and precision straight edge.
If the side clearance is greater than maximum, replace the rotors as a set.
If necessary, replace the timing chain cover.
|
5. |
Inspect the rotor body clearance.
Using a feeler gauge, measure the clearance between the outer rotor and body.
If the body clearance is greater than maximum, replace the rotors as a set.
If necessary, replace the timing chain cover.
|
6. |
Inspect the rotor guide clearance.
|
Hyundai Tucson (LM) 2010-2015 Owners Manual: To increase cruise control speed
Push the lever (1) up (to RES+) and hold it, while monitoring the SET speed
on the instrument cluster. Release the lever when the desired speed is shown
and the vehicle will accelerate to that speed.
Push the lever (1) up (to RES+) and release it immediately. The cruising
speed wil ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Special Service Tools
Special Service Tools
Tool (Number and name)IllustrationUseCrankshaft front oil seal installer(09231-2E000)Installation of the front oil seal 09231-2E000 (installer)Valve stem seal installer(09222-2E000)Installation of the valve stem oil sealValve spring compressor(09222-3K000)(09222-3K100)Remo ...