Hyundai Tucson: Ignition System / Description and Operation
Hyundai Tucson (LM) 2010-2015 Service Manual / Engine Electrical System / Ignition System / Description and Operation
| Description |
Ignition timing is controlled by the electronic control ignition timing system.
The standard reference ignition timing data for the engine
operating conditions are pre-pro grammed in the memory of the ECM
(Engine Control Module).
The engine operating conditions (speed, load, warm-up
condition, etc.) are detected by the various sensors. Based on these
sensor signals and the ignition timing data, signals to interrupt the
primary current are sent to the ECM.
The ignition coil is activated, and timing is controlled.
Ignition System
...
Repair procedures
On-vehicle Inspection
Inspect ignition coil assembly and Perform spark test
1.
Check for DTCs.
•
If a DTC is present, perform troubleshooting in accordance with the ...
Other information:
Hyundai Tucson (LM) 2010-2015 Service Manual: Rear Cross Member Repair procedures
Replacement
1.
Remove the rear wheel & tire.
Tightening torque :
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
Be careful not to damage to the hub bolts when removing the rear wheel & tire.
2.
Remove the parking brake cable.
(Refer to the BR ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Cluster Ion Generator Description and Operation
Description
1.
The function of cluster ion generator is cleaning air by sterilizing and dissolving of air conditioner.
2.
The function of cluster ion generator is controlling mold caused by stench of air conditioner and external inflow of air.
...
© 2010-2024 www.htmanual.net
