Hyundai Tucson: Charging System / Description and Operation

Description
The charging system included a battery, an alternator with a built-in regulator, and the charging indicator light and wire.
The Alternator has eight built-in diodes, each rectifying AC current to DC current.
Therefore, DC current appears at alternator "B" terminal.
In addition, the charging voltage of this alternator is regulated by the battery voltage detection system.
The alternator is regulated by the battery voltage detection system. The main components of the alternator are the rotor, stator, rectifier, capacitor brushes, bearings and V-ribbed belt pulley. The brush holder contains a built-in electronic voltage regulator.
Alternator Management System
Alternator management system controls the charging voltage set point in order to improve fuel economy, manage alternator load under various operating conditions, keep the battery charged, and protect the battery from over-charging. ECM controls generating voltage by duty cycle (charging control, discharging control, normal control) based on the battery conditions and vehicle operating conditions.
The system conducts discharging control when accelerating a vehicle. Vehicle reduces an alternator load and consumes an electric power form a battery.
The system conducts charging control when decelerating a vehicle. Vehicle increases an alternator load and charges a battery.
Charging System
...

Repair procedures
On-vehicle Inpection     • First of all, check for DTCs. If a DTC is present, perform troubleshooting in accordance with the procedure for that DTC. (Refer to DTC guide) ...

Other information:

Hyundai Tucson (LM) 2010-2015 Owners Manual: Deleting a Device
Press the key  Select [Phone] Select [Paired Phone List] From the paired phone list, select the device you want to delete and select [Delete] button. ✽ NOTICE When deleting the currently connected device, the device will automatically be disconnected to proceed with the de ...

Hyundai Tucson (LM) 2010-2015 Owners Manual: Steering remote controller
1. VOLUME Used to control volume. 2. MUTE Mutes audio volume. 3. SEEK When pressed shortly (under 0.8 seconds) Radio mode : searches broadcast frequencies saved to presets. M e d i a ( C D / U S B / i Po d ®/ M y Music/BT Audio) modes : changes the track, file or chapter. When press ...

© 2010-2024 www.htmanual.net