Hyundai Tucson: Charging System / Alternator Specifications

Specification
Alternator
Item
Specification
Rated voltage
13.5V, 120A
Speed in use
1,000 ~ 18,000 rpm
Voltage regulator
IC Regulator built-in type
Regulator Setting Voltage
External mode
Refer to below graph
Internal mode
14.55 ± 0.3V
Temperature Gradient
External mode
0 ± 3 mV / °C
Internal mode
-3.5 ± 2mV / °C

x Regulator Setting Voltage (External mode)
Alternator Description and Operation
Description The Alternator has eight built-in diodes, each rectifying AC current to DC current. Therefore, DC current appears at alternator "B" terminal. In addition, the charging voltage of this ...

Alternator Components and Components Location
Components 1. OAD (Overrunning Alternator Decoupler) pulley2. Front housing3. Front bearing4. Stator5. Rotor 6. Rear bearing 7. Rear housing 8. Rectifier assembly 9. Regulator assembly 10. Rear c ...

Other information:

Hyundai Tucson (LM) 2010-2015 Owners Manual: Front seat warmers (if equipped)
While the engine is running, push either of the switches to warm the driver's seat or front passenger's seat. During mild weather or under conditions where the operation of the seat warmer is not needed, keep the switches in the OFF position. Each time you push the switch, the temperature ...

Hyundai Tucson (LM) 2010-2015 Owners Manual: Vehicle identification number (VIN)
The vehicle identification number (VIN) is the number used in registering your car and in all legal matters pertaining to its ownership, etc. The number is punched on the floor under the passenger seat. To check the number, open the cover. The VIN is also on a plate attached to the top of ...

© 2010-2024 www.htmanual.net