Hyundai Tucson: Charging System / Alternator Components and Components Location
| Components |
| 1. OAD (Overrunning Alternator Decoupler) pulley 2. Front housing 3. Front bearing 4. Stator 5. Rotor | 6. Rear bearing 7. Rear housing 8. Rectifier assembly 9. Regulator assembly 10. Rear cover |
Alternator Specifications
Specification
Alternator
ItemSpecificationRated voltage13.5V, 120ASpeed in use 1,000 ~ 18,000 rpmVoltage regulatorIC Regulator built-in typeRegulator Setting VoltageExternal mode Refer to below ...
Alternator Schematic Diagrams
Circuit Diagram
•
COM signal - When
controlling the voltage generated, the ECM sends the target voltage data
to the alternator via a PWM signal.(High voltage: 4V or h ...
Other information:
Hyundai Tucson (LM) 2010-2015 Service Manual: Intake Air Temperature Sensor (IATS) Description and Operation
Description
Intake Air Temperature Sensor (IATS) is included inside
Manifold Absolute Pressure Sensor and detects the intake air
temperature.
To calculate precise air quantity, correction of the air
temperature is needed because air density varies according to the
temperature. So the ECM ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Hazard Lamp Switch Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the hazard lamp switch assembly.
(Refer to the BE group - "Audio head unit")
3.
Disconnect the hazard lamp switch connector (A).
4.
If the hazard lamp switch is not as specified, replace it carefully and take care n ...
