Hyundai Tucson: Evaporative Emission Control System / Repair procedures
| Inspection |
| [EVAP. Leakage Test] |
| 1. |
Select "Evap. Leakage Test".
|
| 2. |
Proceed with the test according to the screen introductions.
|
Components and Components Location
Components Location
1. Purge Control Solenoid Valve (PCSV)2. Vapor line3. ORVR valve4. Fuel tank air filter5. Canister Close Valve (CCV)6. Canister7. Fuel Tank Pressure Sensor (FTPS)
...
Canister Repair procedures
Removal
1.
Remove the fuel tank.
(Refer to "Fuel tank" in FL group.)
2.
Disconnect the vapor tube quick-connector (A,B) and the ventilation hose (C).
3.
Remove the canister in the direct ...
Other information:
Hyundai Tucson (LM) 2010-2015 Owners Manual: 3-point rear center seat belt
To fasten the rear center seat belt:
1. Extract the metal tab from the hole of the belt assembly cover and slowly
pull the metal tab out from the retractor.
2. Insert the metal tab (A) into the buckle (C). There will be an audible “click”
when the tab locks into the buckle. Make sure t ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Auto Light Sensor Repair procedures
Inspection
In the state of IGN1 ON, when multi function switch module
detects auto light switch on, tail lamp relay output and head lamp low
relay output are controlled according to auto light sensor's input.
The auto light control doesn't work if the pin sunlight
supply (5V regulated powe ...
