Hyundai Tucson: Evaporative Emission Control System / Canister Repair procedures

Hyundai Tucson (LM) 2010-2015 Service Manual / Emission Control System / Evaporative Emission Control System / Canister Repair procedures

Removal

1.	Remove the fuel tank. (Refer to "Fuel tank" in FL group.)

2.	Disconnect the vapor tube quick-connector (A,B) and the ventilation hose (C).

3.	Remove the canister in the direction of an arrow after removing the installation screws (D).

Inspection

1.	Check for the following items visually. - Cracks or leakage of the canister - Loose connection, distortion, or damage of the vapor hose/tube A: Canister - Atmosphere B: Canister - Intake Manifold C: Canister - Fuel Tank

Installation

Install in the reverse order of removal.

Canister installation bolt/nut:

3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)

Repair procedures

Inspection [EVAP. Leakage Test] 1. Select "Evap. Leakage Test". 2. Proceed with the test according to the screen introductions. ...

Fuel Filler Cap Description and Operation

Description A ratchet tightening device on the threaded fuel filler cap reduces the chances of incorrect installation, which seals the fuel filler. After the gasket on the fuel filler cap and t ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Power Door Mirror Switch Repair procedures
Removal Driver Door Mirror Switch 1. Disconnect the negative battery terminal. 2. Remove the front door trim. (Refer to the BD group - "Front door") 3. Remove the screws from power window switch (A) and connectors (B). [LHD] [RHD] 4. Remove the driver power window switch (A) from ...

Hyundai Tucson (LM) 2010-2015 Service Manual: CVVT Oil Control Valve (OCV) Specifications
Specification ItemSpecificationCoil Resistance (x)9.4 ~ 10.4 [20°C(68°F)] ...