Hyundai Tucson: General Information / Specifications
Hyundai Tucson (LM) 2010-2015 Service Manual / Engine Control / Fuel System / General Information / Specifications
| Specifications |
| Fuel Delivery System |
| Items | Specification | |
| Fuel Tank | Capacity | 58x (15.3 U.S.gal., 61.3 U.S.qt., 51.0 Imp.qt.) |
| Fuel Filter | Type | Paper type |
| Fuel Pressure | Low Pressure Fuel Line | 495 ~ 505 kPa (4.9 ~ 5.1 kgf/cmx, 71.8 ~ 73.2 psi) |
| High Pressure Fuel Line | 2.0 ~ 15.0 MPa (20.4 ~ 153.0 kgf/cmx, 290.1 ~ 2175.6 psi) | |
| Fuel Pump | Type | Electrical, in-tank type |
| Driven by | Electric motor | |
| High Pressure Fuel Pump | Type | Mechanical type |
| Driven by | Camshaft | |
| Sensors |
Manifold Absolute Pressure Sensor (MAPS)
x Type: Piezo-resistive pressure sensor type
x Specification
| Pressure [kPa (kgf/cmx, psi)] | Output Voltage (V) |
| 20.0 (0.20, 2.9) | 0.79 |
| 46.7 (0.47, 6.77) | 1.84 |
| 101.3 (1.03, 14.7) | 4.0 |
Intake Air Temperature Sensor (IATS)
x Type: Thermistor type
x Specification
| Temperature | Resistance (kx) | |
| °C | °F | |
| -40 | -40 | 40.93 ~ 48.35 |
| -20 | -4 | 13.89 ~ 16.03 |
| 0 | 32 | 5.38 ~ 6.09 |
| 10 | 50 | 3.48 ~ 3.90 |
| 20 | 68 | 2.31 ~ 2.57 |
| 40 | 104 | 1.08 ~ 1.21 |
| 50 | 122 | 1.56 ~ 1.74 |
| 60 | 140 | 0.54 ~ 0.62 |
| 80 | 176 | 0.29 ~ 0.34 |
Engine Coolant Temperature Sensor (ECTS)
x Type: Thermistor type
x Specification
| Temperature | Resistance (kx) | |
| °C | °F | |
| -40 | -40 | 48.14 |
| -20 | -4 | 14.13 ~ 16.83 |
| 0 | 32 | 5.79 |
| 20 | 68 | 2.31 ~ 2.59 |
| 40 | 104 | 1.15 |
| 60 | 140 | 0.59 |
| 80 | 176 | 0.32 |
Throttle Position Sensor (TPS) [integrated into ETC module]
x Type: Hall IC Non-contact sensor type
x Specification
| Throttle angle(°) | Output Voltage (V) | |
| TPS1 | TPS2 | |
| 0 | 0.5 | 4.5 |
| 10 | 0.96 | 4.05 |
| 20 | 1.41 | 3.59 |
| 30 | 1.87 | 3.14 |
| 40 | 2.32 | 2.68 |
| 50 | 2.78 | 2.23 |
| 60 | 3.23 | 1.77 |
| 70 | 3.69 | 1.32 |
| 80 | 4.14 | 0.86 |
| 90 | 4.6 | 0.41 |
| 98 | 4.65 | 0.35 |
| C.T (0) | 0.5 | 4.5 |
| W.O.T (86) | 4.41 | 0.59 |
Crankshaft Position Sensor (CKPS)
x Type: Magnetic field sensitive Type
x Specification
| Item | Specification |
| Coil Resistance (x) | 774 ~ 946 [20°C (68°F)] |
Camshaft Position Sensor (CMPS)
x Type: Hall effect type
Knock Sensor (KS)
x Type: Piezo-electricity type
x Specification
| Item | Specification |
| Capacitance (pF) | 850 ~ 1,150 |
Heated Oxygen Sensor (HO2S) [Bank 1/Sensor 1]
x Type: Zirconia (ZrO2) [Linear] type
x Specification
| Item | Specification |
| Heater Resistance (x) | 2.4 ~ 4.0 [20°C(69.8°F)] |
Heated Oxygen Sensor (HO2S) [Bank 1/Sensor 2]
x Type: Zirconia (ZrO2) [Binary] type
x Specification
| A/F Ratio (x) | Output Voltage(V) |
| RICH | 0.6 ~ 1.0 |
| LEAN | 0 ~ 0.4 |
| Item | Specification |
| Heater Resistance (x) | Approx. 9.0 [20°C(68°F)] |
Rail Pressure Sensor (RPS)
x Type: Piezo-electricity type
x Specification
Accelerator Position Sensor (APS)
x Type: Variable resistor type
x Specification
| Accelerator Position | Output Voltage (V) | |
| APS1 | APS2 | |
| C.T | 0.7 ~ 0.8 | 0.29 ~ 0.46 |
| W.O.T | 3.85 ~ 4.35 | 1.93 ~ 2.18 |
Fuel Tank Pressure Sensor (FTPS)
x Type: Piezo - Resistivity type
x Specification
| Pressure [kPa (kgf/cmx, in H2O) | Output Voltage (V) |
| -6.67 (-0.068, -26.8) | 0.5 |
| 0 | 2.5 |
| +6.67 (0.068, 26.8) | 4.5 |
| Actuators |
Injector
x Specification
| Item | Specification |
| Coil Resistance (x) | 1.5 [20°C(68°F)] |
ETC Motor [integrated into ETC Module]
x Specification
| Item | Specification |
| Coil Resistance (x) | 0.3 ~ 100 [20°C(68°F)] |
Purge Control Solenoid Valve (PCSV)
x Specification
| Item | Specification |
| Coil Resistance (x) | 22.0 ~ 26.0 [20°C(68°F)] |
CVVT Oil Control Valve (OCV)
x Specification
| Item | Specification |
| Coil Resistance (x) | 9.4 ~ 10.4 [20°C(68°F)] |
Variable Intake Solenoid (VIS) Valve
x Specification
| Item | Specification |
| Coil Resistance (x) | 30.0 ~ 35.0 [20°C(68°F)] |
Fuel Pressure Control Valve
x Specification
| Item | Specification |
| Coil Resistance (x) | 0.5 [20°C(68°F)] |
Ignition Coil
x Type: Stick type
x Specification
| Item | Specification |
| Primary Coil Resistance (x) | 0.75 ± 15%[20°C(68°F)] |
| Secendary Coil Resistance (kx) | 5.9 ± 15%[20°C(68°F)] |
Canister Close Valve (CCV)
x Specification
| Item | Specification |
| Coil Resistance (x) | 19.8 ~ 21.8 [20°C(68°F)] |
| Service Standard |
| Item | Specification | ||
| Ignition Timing (°) | ATDC 5 ± 10 | ||
| Idle Speed (rpm) | A/C OFF | Neutral, N, P-range | 660 ± 100 |
| D-range | 660 ± 100 | ||
| A/C ON | Neutral, N, P-range | 660 ± 100 | |
| D-range | 660 ± 100 | ||
| Tightening Torques |
Engine Control System
| Item | kgf.m | N.m | lb-ft |
| ECM installation nut | 0.4 ~ 0.6 | 3.9 ~ 5.9 | 2.9 ~ 4.3 |
| ECM bracket installation bolt | 2.2 ~ 3.3 | 21.6 ~ 32.4 | 15.9 ~ 23.9 |
| ECM bracket installation nut | 1.0 ~ 1.5 | 9.8 ~ 14.7 | 7.2 ~ 10.9 |
| Manifold absolute pressure sensor installation bolt | 1.0 ~ 1.2 | 9.8 ~ 11.8 | 7.2 ~ 8.7 |
| Engine coolant temperature sensor installation | 3.0 ~ 4.0 | 29.4 ~ 39.2 | 21.7 ~ 28.9 |
| Crankshaft position sensor installation bolt | 1.0 ~ 1.2 | 9.8 ~ 11.8 | 7.2 ~ 8.7 |
| Camshaft position sensor (Bank 1 / Intake) installation bolt | 1.0 ~ 1.2 | 9.8 ~ 11.8 | 7.2 ~ 8.7 |
| Camshaft position sensor (Bank 1 / Exhaust) installation bolt | 1.0 ~ 1.2 | 9.8 ~ 11.8 | 7.2 ~ 8.7 |
| Knock sensor installation bolt | 1.9 ~ 2.4 | 18.6 ~ 23.5 | 13.7 ~ 17.4 |
| Heated oxygen sensor (Bank 1 / sensor 1) installation | 4.0 ~ 5.0 | 39.2 ~ 49.1 | 28.9 ~ 36.2 |
| Heated oxygen sensor (Bank 1 / sensor 2) installation | 4.0 ~ 5.0 | 39.2 ~ 49.1 | 28.9 ~ 36.2 |
| Rail pressure sensor installation | 3.0 ~ 3.6 | 30.0 ~ 35.0 | 22.1 ~ 25.8 |
| Electronic throttle body installation bolt | 0.8 ~ 1.0 | 7.8 ~ 9.8 | 5.8 ~ 7.2 |
| Purge control solenoid valve bracket installation bolt | 1.0 ~ 1.2 | 9.8 ~ 11.8 | 7.2 ~ 8.7 |
| CVVT oil control valve (Bank 1 / Intake) installation bolt | 1.0 ~ 1.2 | 9.8 ~ 11.8 | 7.2 ~ 8.7 |
| CVVT oil control valve (Bank 1 / Exhaust) installation bolt | 1.0 ~ 1.2 | 9.8 ~ 11.8 | 7.2 ~ 8.7 |
| Ignition coil installation bolt | 1.0 ~ 1.2 | 9.8 ~ 11.8 | 7.2 ~ 8.7 |
Fuel Delivery System
| Item | kgf.m | N.m | lb-ft |
| Fuel tank installation bolt | 4.0 ~ 5.5 | 39.2 ~ 54.0 | 28.9 ~ 39.8 |
| Filler-neck assembly bracket installation bolt | 0.4 ~ 0.6 | 3.9 ~ 5.9 | 2.9 ~ 4.3 |
| Filler-neck assembly installation bolt | 0.8 ~ 1.2 | 7.8 ~ 11.8 | 5.8 ~ 8.7 |
| Accelerator pedal module installation nut | 1.7 ~ 2.6 | 9.8 ~ 14.7 | 7.2 ~ 10.8 |
| Accelerator pedal module installation bolt | 0.9 ~ 1.4 | 8.8 ~ 13.7 | 6.5 ~ 10.1 |
| Delivery pipe installation bolt | 1.9 ~ 2.4 | 18.6 ~ 23.5 | 13.7 ~ 17.4 |
| High pressure fuel pump installation bolt | 1.3 ~ 1.5 | 12.8 ~ 14.7 | 9.4 ~ 10.9 |
| High pressure fuel pipe installation nut | 2.7 ~ 3.3 | 26.5 ~ 32.4 | 19.5 ~ 23.9 |
| High pressure fuel pipe function block installation bolt | 1.0 ~ 1.2 | 9.8 ~ 11.8 | 7.2 ~ 8.7 |
Special Service Tools
Special Service Tools
ItemIllustrationApplicationFuel Pressure Gauge(09353-24100)Measuring the fuel line pressureFuel Pressure Gauge Adapter(09353-02100)Connection between the high pressure fuel ...
Other information:
Hyundai Tucson (LM) 2010-2015 Service Manual: Timing Chain Components and Components Location
Components
1. Intake camshaft2. Exhaust camshaft3. Intake CVVT assembly4. Exhaust CVVT assembly5. Timing chain6. Timing chain tensioner arm7. Timing chain tensioner8. Timing chain guide9. Timing chain cover10. Service plug bolt & gasket11. Front oil seal12. Crankshaft damper pulley
...
Hyundai Tucson (LM) 2010-2015 Owners Manual: Brake fluid
Checking the brake fluid level
Check the fluid level in the reservoir periodically. The fluid level should be
between MAX and MIN marks on the side of the reservoir.
Before removing the reservoir cap and adding brake fluid, clean the area around
the reservoir cap thoroughly to prevent brake ...
© 2010-2024 www.htmanual.net
