Hyundai Tucson: Engine Control System / ETC (Electronic Throttle Control) System Description and Operation

Hyundai Tucson (LM) 2010-2015 Service Manual / Engine Control / Fuel System / Engine Control System / ETC (Electronic Throttle Control) System Description and Operation

Description

The Electronic Throttle Control (ETC) System consists of a throttle body with an integrated control motor and throttle position sensor (TPS). Instead of the traditional throttle cable, an Accelerator Position Sensor (APS) is used to receive driver input. The ECM uses the APS signal to calculate the target throttle angle; the position of the throttle is then adjusted via ECM control of the ETC motor. The TPS signal is used to provide feedback regarding throttle position to the ECM. Using ETC, precise control over throttle position is possible; the need for external cruise control modules/cables is eliminated.

1. Dry bearing
2. DC motor
3. Non-contact hall sensor
4. Gear

5. Magnet
6. Hall IC
7. Yoke
8. Stator

Schematic Diagram

Engine Control Module (ECM) Repair procedures

Removal When replacing the ECM, the vehicle equipped with the immobilizer must be performed procedure as below. [In the case of installing used ECM] 1) Perform "ECM Neutral ...

ETC (Electronic Throttle Control) System Troubleshooting

Fail-Safe Mode ItemFail-SafeETC MotorThrottle valve stuck at 7°TPSTPS 1 faultECM looks at TPS2TPS 2 faultECM looks at TPS1TPS 1,2 faultThrottle valve stuck at 7°APSAPS 1 faultECM looks at APS 2 ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: PDM Relay Box Description and Operation
Description The PDM relay is united with IG1, IG2 and ACC relays and installed beside the assist instrument panel. ...

Hyundai Tucson (LM) 2010-2015 Owners Manual: Using MP3 CD Mode
Playing/Pausing MP3 Files Once an MP3 disc is inserted the mode will automatically start and begin playing. While playing, press the button to pause and press button to play. ✽ NOTICE If there are numerous files and folders within the disc, reading time could take more than 10 ...