Inspection |
1. |
Turn the ignition switch OFF. |
2. |
Disconnect the IATS connector. |
3. |
Measure resistance between the IATS terminals 3 and 4. |
4. |
Check that the resistance is within the specification.
|
Removal |
1. |
Turn the ignition switch OFF and disconnect the battery negative (-) cable. |
2. |
Disconnect the manifold absolute pressure sensor connector (A). |
3. |
Remove the installation bolt (B), and then remove the sensor from the surge tank. |
Installation |
|
|
1. |
Install in the reverse order of removal.
|
Hyundai Tucson (LM) 2010-2015 Service Manual: Climate Control Air Filtar Repair procedures
Replacement
1.
Disconnect the damper (A) from the glove box (B).
2.
Remove the glove box lift (C).
3.
Remove the filter cover (A) with pushing the knob.
4.
Replace the air filter (B), install it after making sure of the direction of air filter.
In case of dri ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Specifications
Specifications
ItemSpecificationMaster cylinderxLHDRHDTypeTandem typeTandem typeCylinder I.D.CBS: O 20.64O 25.4 mmABS/ ESP: O 22.22mmPiston stroke45mm(1.77in) / 30mm(1.18in)Fluid level switchProvidedProvidedBrake boosterxLHDRHDType11" Single8+9" TandemBoosting ratio9.0 : 19.0 ...