Hyundai Tucson: Engine Control System / Heated Oxygen Sensor (HO2S) Specifications
| Specification |
| Item | Specification |
| Heater Resistance (x) | 2.4 ~ 4.0 [20°C(68°F)] |
| A/F Ratio (x) | Output Voltage(V) |
| RICH | 0.6 ~ 1.0 |
| LEAN | 0 ~ 0.4 |
| Item | Specification |
| Heater Resistance (x) | Approx. 9.0 [20°C(68°F)] |
Heated Oxygen Sensor (HO2S) Description and Operation
Description
Heated Oxygen Sensor (HO2S) consists of zirconium and alumina
and is installed both upstream and downstream of the Manifold Catalytic
Converter. The sensor output voltage varies in ...
Heated Oxygen Sensor (HO2S) Schematic Diagrams
Circuit Diagram
(M/T)
(A/T)
...
Other information:
Hyundai Tucson (LM) 2010-2015 Owners Manual: Reprogramming a single HomeLink® button
To program a new device to a previously trained HomeLink® button, follow these
steps:
1. Press and hold the desired HomeLink® button. Do NOT release until step 4 has
been completed.
2. When the indicator light begins to flash slowly (after 20 seconds), position
the handheld transmitter 1 t ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Side Impact Sensor (SIS) Description and Operation
Description
Side Impact Sensor (SIS) system consists of two P-SIS which
are installed at each center of the front door module (LH and RH) and
two SIS which are installed at each center pillar nearby (LH and RH).
Side Pressure Sensor is also called P-SIS because that detects pressure due to c ...
