Hyundai Tucson: Engine Control System / Accelerator Position Sensor (APS) Description and Operation
Accelerator Position Sensor (APS) is installed on the
accelerator pedal module and detects the rotation angle of the
accelerator pedal. The APS is one of the most important sensors in
engine control system, so it consists of the two sensors which adapt
individual sensor power and ground line. The second sensor monitors the
first sensor and its output voltage is half of the first one. If the
ratio of the sensor 1 and 2 is out of the range (approximately 1/2), the
diagnostic system judges that it is abnormal.
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the RPS at idle and various engine speed.
ConditionOutput Voltage (V)Idle Approx. 1.21, ...
Specification
AcceleratorPositionOutput Voltage (V)APS1APS2C.T0.7 ~ 0.80.29 ~ 0.46W.O.T3.85 ~ 4.351.93 ~ 2.18
...
Other information:
Hyundai Tucson (LM) 2010-2015 Service Manual: Schematic Diagrams
ESC connector input/output
Connector TerminalSpecificationRemarkNoDescription29IGNITION1(+)High level of wake up voltage :5.0V < V < 16.0VLow level of wake up voltage V < 2.4VMax. current : I < 50mAx25POS. BATTERY 1.(SOLENOID)Over voltage range : 17.0 ± 0.5V Operating voltage range ...
Hyundai Tucson (LM) 2010-2015 Owners Manual: Corrosion protection
Protecting your vehicle from corrosion
By using the most advanced design and construction practices to combat corrosion,
HYUNDAI produces cars of the highest quality.However, this is only part of the job.
To achieve the long-term corrosion resistance your vehicle can deliver, the owner's
coop ...