Hyundai Tucson: Engine Control System / Injector Description and Operation

Hyundai Tucson (LM) 2010-2015 Service Manual / Engine Control / Fuel System / Engine Control System / Injector Description and Operation

Description

The GDI injector is similar to a standard injector, but sprays fuel at a much higher pressure directly into the combustion chamber and has a swirl disc to get the fuel swirling as it exits the nozzle. This aids in atomization of the fuel.

The ECM controls both the feed circuits (high side) to feed voltage to the injectors and the ground circuits (low side) to energize the injectors. Also, the feed for 2 injectors comes from the same driver set. As the ignition coils are paired with cylinders (1-4 and 2-3), the injectors are also set up in pairs.

Fuel Tank Pressure Sensor (FTPS) Repair procedures

Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the FTPS. Specification: Refer to "Specification" Removal 1. Turn the ignition swit ...

Injector Specifications

Specification ItemSpecificationCoil Resistance (x)1.5 [20°C(68°F)] ...

Other information:

Hyundai Tucson (LM) 2010-2015 Owners Manual: Inside light
Tail light and Back-up light 1. Open the tailgate. 2. Remove the service cover using a flat-blade screwdriver. 3. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly. 4. Tail light: Remove the bulb fro ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Fuel Pressure Control Valve Schematic Diagrams
Circuit Diagram (M/T) (A/T) ...