Hyundai Tucson: Engine Control System / Injector Troubleshooting

Signal Waveform
The three waveforms below are taken from the #1 and #4 injectors. The top waveform is from the high side (feed side) of the #1 and #4 injectors, while the middle waveform is from the low side (ground side) of the #1 injector and the bottom waveform is from the low side of the #4 injector.
The middle waveform is the same as the top waveform because there is no ground for the circuit. With no current flowing in the circuit, the #1 injector is not energized and fuel does not flow.
The bottom waveform shows that ground is supplied and there is a voltage drop across the #4 injector. With current flowing in the circuit, the #4 injector is energized and fuel flows.

Injector Specifications
Specification ItemSpecificationCoil Resistance (x)1.5 [20°C(68°F)] ...

Injector Schematic Diagrams
Circuit Diagram (M/T) (A/T) ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Alternator Specifications
Specification Alternator ItemSpecificationRated voltage13.5V, 120ASpeed in use 1,000 ~ 18,000 rpmVoltage regulatorIC Regulator built-in typeRegulator Setting VoltageExternal mode Refer to below graphInternal mode14.55 ± 0.3V Temperature GradientExternal mode0 ± 3 mV / °CInternal mode-3.5 ± ...

Hyundai Tucson (LM) 2010-2015 Owners Manual: Turn signals and lane change signals
To signal a turn, move the lever up for a right turn or down for a left turn to position (A). The lever will return to the OFF position when the turn is completed. To signal a lane change, move the lever slightly and hold it in position (B). The lever will return to the OFF position when re ...

© 2010-2024 www.htmanual.net