Hyundai Tucson: Engine Control System / CVVT Oil Control Valve (OCV) Repair procedures

Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the OCV connector.
3.
Measure resistance between the OCV terminals 1 and 2.
4.
Check that the resistance is within the specification.

Specification: Refer to “Specification”

Removal
1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Disconnect the CVVT oil control valve connector (A).
3.
Remove the installation bolt (B), and then remove the valve from the engine.
[Bank 1 / Intake]

[Bank 1 / Exhaust]

Installation
   
Install the component with the specified torques.
Note that internal damage may occur when the component is dropped. If the component has been dropped, inspect before installing.
   
Apply engine oil to the valve O-ring.
1.
Install in the reverse order of removal.

CVVT oil control valve installation bolt:
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

CVVT Oil Control Valve (OCV) Schematic Diagrams
Circuit Diagram (M/T) (A/T) ...

Variable Intake Solenoid (VIS) Valve Description and Operation
Description Variable Intake manifold Solenoid (VIS) valve is installed on the intake manifold. The VIS valve controls the vacuum modulator which activates a valve in the intake manifold. The EC ...

Other information:

Hyundai Tucson (LM) 2010-2015 Owners Manual: Remote key
To lock the doors, press the Door Lock button (1) on the remote key. Press the Door Unlock button (2) on the remote key, the driver’s door will unlock. If you press the Door Unlock button on the remote key again within four seconds, then all the doors will unlock. Once the doors are unlo ...

Hyundai Tucson (LM) 2010-2015 Owners Manual: iPod® Mode Menu
Within this mode, you will have access to the Random(Shuffle), Repeat and List features. Random(Shuffle) Press the  button to play songs in random(Shuffle) order. Each time the button is pressed, the feature changes in order of Random(Shuffle) Album➟Random (Shuffle) All➟Off. ...

© 2010-2024 www.htmanual.net