Hyundai Tucson: Engine Control System / Fuel Pressure Control Valve Description and Operation

Hyundai Tucson (LM) 2010-2015 Service Manual / Engine Control / Fuel System / Engine Control System / Fuel Pressure Control Valve Description and Operation

Description

Fuel Pressure Control Valve is installed on the high pressure fuel pump and controls fuel flow flowing into the injectors in accordance with the ECM signal calculated based on various engine condition.

Variable Intake Solenoid (VIS) Valve Repair procedures

Inspection 1. Turn the ignition switch OFF. 2. Disconnect the VIS valve connector. 3. Measure resistance between VIS valve terminals 1 and 2. Specification: Refer to "Specification" ...

Fuel Pressure Control Valve Specifications

Specification ItemSpecificationCoil Resistance (x)0.5 [20°C(68°F) ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Description and Operation
Description The charging system included a battery, an alternator with a built-in regulator, and the charging indicator light and wire. The Alternator has eight built-in diodes, each rectifying AC current to DC current. Therefore, DC current appears at alternator "B" terminal. In addition, the ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Knock Sensor (KS) Schematic Diagrams
Circuit Diagram (M/T) (A/T) ...