Hyundai Tucson: Engine Control System / Fuel Pressure Control Valve Repair procedures

Hyundai Tucson (LM) 2010-2015 Service Manual / Engine Control / Fuel System / Engine Control System / Fuel Pressure Control Valve Repair procedures

Inspection

1.	Turn the ignition switch OFF and disconnect the battery negative (-) cable.

2.	Disconnect the fuel pressure regulator valve connector.

3.	Measure resistance between the fuel pressure regulator valve terminals 1 and 2.

Check that the resistance is within the specification.

Specification: Refer to “Specification”

Removal

(Refer to Fuel Delivery System - "High Pressure Fuel Pump”)

Installation

(Refer to Fuel Delivery System - "High Pressure Fuel Pump”)

Fuel Pressure Control Valve Schematic Diagrams

Circuit Diagram (M/T) (A/T) ...

Canister Close Valve (CCV) Description and Operation

Description Canister Close Valve (CCV) is normally open and is installed on the canister ventilation line. It seals evaporative emission control system by shutting the canister from the atmosph ...

Other information:

Hyundai Tucson (LM) 2010-2015 Owners Manual: Towing service
If emergency towing is necessary, we recommend having it done by an authorized HYUNDAI dealer or a commercial tow-truck service. Proper lifting and towing procedures are necessary to prevent damage to the vehicle. The use of wheel dollies or flatbed is recommended. It is acceptable to tow th ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Quarter Fixed Glass Repair procedures
Removal • Put on gloves to protect your hands. • Take care not to body surface and other parts. 1. Remove the following parts A. Rear seat assembly (Refer to Seat & Power Seat - "Rear Seat") B. Rear door scuff trim (Refer to Interior - "Interio ...