Hyundai Tucson: Engine Control System / Canister Close Valve (CCV) Description and Operation

Hyundai Tucson (LM) 2010-2015 Service Manual / Engine Control / Fuel System / Engine Control System / Canister Close Valve (CCV) Description and Operation

Description

Canister Close Valve (CCV) is normally open and is installed on the canister ventilation line. It seals evaporative emission control system by shutting the canister from the atmosphere during EVAP leak detection process.

Fuel Pressure Control Valve Repair procedures

Inspection 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the fuel pressure regulator valve connector. 3. Measure resistance between the fuel ...

Canister Close Valve (CCV) Specifications

Specification ItemSpecificationCoil Resistance (x)19.8 ~ 21.8 [20°C(68°F) ...

Other information:

Hyundai Tucson (LM) 2010-2015 Owners Manual: Changing engine coolant
Have coolant changed by an authorized HYUNDAI dealer according to the Maintenance Schedule at the beginning of this chapter. WARNING Do not use engine coolant or antifreeze in the washer fluid reservoir. Engine coolant can severely obscure visibility when sprayed on the windshield and ma ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Repair procedures
Inspection 1. After disconnecting the vapor hose from the PCV valve, remove the PCV valve. 2. Reconnect the PCV valve to the vapor hose. 3. Run the engine at idle, then put a finger over the open end of the PCV valve and make sure that intake manifold vacuum can be felt. ...