Hyundai Tucson: Fuel Delivery System / Components and Components Location
| Components Location |
| 1. Fuel tank 2. Fuel pump 3. Fuel filter 4. Fuel pressure regulator 5. Canister 6. Fuel tank air filter 7. Fuel tank band | 8. Fuel tank pressure sensor (FTPS) 9. Canister close valve (CCV) 10. Fuel level sender (FLS) 11. Fuel filler hose 12. Ventilation tube 13. Vapor tube 14. Fuel pump plate cover |
| [High Pressure Fuel Line] |
| 1. High Pressure Fuel Pump 2. High Pressure Fuel Pipe | 3. Delivery Pipe 4. Injector |
In case of removing the high pressure fuel pump, high
pressure fuel pipe, delivery pipe, and injector, there may be injury
caused by leakage of the high pressure fuel. So don’t do any repair
work right after engine stops. |
Repair procedures
Fuel Pressure Test (Low pressure system)
1.
Release the residual pressure in fuel line.
(Refer to Fuel Delivery System - "Release Residual Pressure in Fuel Line")
When rem ...
Other information:
Hyundai Tucson (LM) 2010-2015 Owners Manual: Additional safety precautions
Passengers should not move out of or change seats while the vehicle is moving.
A passenger who is not wearing a seat belt during a crash or emergency stop can
be thrown against the inside of the vehicle, against other occupants, or be ejected
from the vehicle.
Do not use any accessories on se ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Anchor Pretensioner Description and Operation
Description
Anchor pretensioner operates as well as belt Pretensioner at
the same time If it gets into its deploy condition after a collision. It
is located at near anchor on front seat and it is an equipment to make
up for the existing short stroke. Anchor pretensioner is supported by
tw ...
