Removal |
1. |
Release the residual pressure in fuel line.
(Refer to Fuel Delivery System - "Release Residual Pressure in Fuel Line") |
2. |
Remove the rear seat.
(Refer to Body - “Seat”) |
3. |
Remove the fuel pump service cover (A). |
4. |
Disconnect the fuel pump connector (A) and the fuel tank pressure sensor connector (B). |
5. |
Disconnect the fuel feed tube quick connector (C) and the vapor tube quick-connector (D). |
6. |
Remove locking ring (A) by using the special service tool (B) [No.:09310-2S200].
|
7. |
Remove the fuel pump from the fuel tank. |
Installation |
1. |
Install in the reverse order of removal.
|
Hyundai Tucson (LM) 2010-2015 Service Manual: Troubleshooting
Troubleshooting
SymptomSuspect areaEngine will not start or hard to startVapor hose damaged or disconnectedEngine hard to startMalfunction of the Purge Control Solenoid ValveRough idle or engine stallsVapor hose damaged or disconnectedMalfunction of the PCV valveRough idleMalfunction of the Eva ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Brake Booster Components and Components Location
Components
1. Brake booster2. Master cylinder assembly3. O-ring
...