Inspection |
1. |
Disconnect the back up lamp switch connector (A). |
2. |
Check the continuity between no. 1 and 2 terminals of backup
lamp switch. When the shift lever is in reverse, there should be
continuity. |
3. |
If necessary, repair or replace the backup lamp switch. |
Replacement |
1. |
Disconnect the back up lamp switch connector (A). |
2. |
Remove the back up lamp switch (A). |
3. |
Replace a new one and install the back up lamp switch.
|
Hyundai Tucson (LM) 2010-2015 Service Manual: Clutch Cover And Disc Components and Components Location
Components
1. Clutch disc2. Clutch cover3. Manual transaxle 4. Engine flywheel5. Clutch release bearing6. Clutch release fork
...
Hyundai Tucson (LM) 2010-2015 Service Manual: Description and Operation
Warning Lamp Activation
Warning Lamp Behavior after Ignition On
As soon as the operating voltage is applied to the SRSCM
ignition input, the SRSCM activates the warning lamp for a LED lamp
check.
The lamp shall turn on for 6 seconds during the initialization phase and be turned off afterw ...