Hyundai Tucson: Manual Transaxle Control System / Shift Lever Repair procedures

Hyundai Tucson (LM) 2010-2015 Service Manual / Manual Transaxle System / Manual Transaxle Control System / Shift Lever Repair procedures

Removal

1.	Remove the center console. (Refer to "Console" in BD group)

2.	Remove the snap pin (A) and the clip (B).

3.	Remove the clip (A) and then remove the shift cable assembly.

Remove the shift lever assembly (A).

Tightening torque:

8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)

Installation is the reverse of removal.

•	When installing, set room side shift lever and T/M side lever to "Neutral" position.

•	When installing, adjust the Control cable. (Refer to "Control Cable adjustment procedure" in this group.)

Shift Lever Components and Components Location

Components 1. Shift lever knob2. Shift lever assembly3. Select cable assembly4. Shift cable assembly ...

Control Cable Components and Components Location

Components 1. Shift lever knob2. Shift lever assembly3. Select cable assembly4. Shift cable assembly ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Schematic Diagrams
System Block Diagram Component Parts And Function Outline Component partFunctionVehicle-speed sensorConverts vehicle speed to pulse.ECMReceives signals from sensor and control switches.Cruise control indicatorIlluminate when CRUISE main switch is ON (Built into cluster)Cruise Control switchesON/ ...

Hyundai Tucson (LM) 2010-2015 Owners Manual: Interior rearview mirrors
Before you start driving, adjust the rearview mirror to the center on the view through the rear window. WARNING Make sure your line of sight is not obstructed. Do not place objects in the rear seat, cargo area, or behind the rear headrests which could interfere with your vision through the r ...