Hyundai Tucson: Manual Transaxle Control System / Control Shaft Assembly Repair procedures

Hyundai Tucson (LM) 2010-2015 Service Manual / Manual Transaxle System / Manual Transaxle Control System / Control Shaft Assembly Repair procedures

Removal

Remove the following items;

A.	Air cleaner assembly and air duct. (Refer to "Intake and Exhaust system" in EM group.)

B.	Battery and battery tray. (Refer to "Charging system" in EE group.)

Set room side Shift lever to N position before remove the control shaft assembly.

2.	Separate the cable (A) from the control shaft after remove the pin (B) and washer (C).

3.	Remove the control shaft assembly after loosen the bolts.

Installation

Installation is the reverse of removal.

•	When installing, set control shaft lever to neutral position.

•

When installing, apply the sealant as shown in the illustration.

Specified sealant : MS 721-40 or MS721-38

2.	After installling, check to be sure that this part operates as designed at each range of T/M side corresponding to each position of shift lever.

Control Shaft Assembly Description and Operation

Description Control shaft assembly is mounted on the top of the manual transmission, and select & shift cable are equipped. Control shaft assembly is operated by shifting the shift lever. ...

Automatic Transaxle System

...

Other information:

Hyundai Tucson (LM) 2010-2015 Owners Manual: Fuses
A vehicle’s electrical system is protected from electrical overload damage by fuses. This vehicle has 2 (or 3) fuse panels, one located in the driver’s side panel bolster, the other in the engine compartment near the battery. If any of your vehicle’s lights, accessories, or controls do ...

Hyundai Tucson (LM) 2010-2015 Owners Manual: To increase cruise control speed
Push the lever (1) up (to RES+) and hold it, while monitoring the SET speed on the instrument cluster. Release the lever when the desired speed is shown and the vehicle will accelerate to that speed. Push the lever (1) up (to RES+) and release it immediately. The cruising speed wil ...