Hyundai Tucson: General Information / Special Service Tools

Special Service Tools
Tools (Number and name)
Illustration
Use
09200-3N000
Engine support fixture
(Beam)

Removal and installation of the transaxle.
Use this beam (SST No. : 09200-38001/09200-3N000) with the supporter (SST No. : 09200-2S000).
09200-2S000
Engine support fixture
(Adapter)

Removal and installation of the transaxle.
Use this beam (SST No. : 09200-38001/09200-3N000) with the supporter (SST No. : 09200-2S000).
09453-3L241
Oil seal installer

Installation of oil seal in the transaxle case side and the transaxle housing side.
2WD : Transaxle case side (SST No.: 09453-3L241), Transaxle housing side (SST No.: 09453-3L241)
[Using with bar (SST No.: 09231-H1100)]
09453-2W100
Oil seal installer(4WD)

Installation of oil seal in the transaxle housing side.
4WD : Transaxle case side (SST No.: 09453-3L241), Transaxle housing side (SST No.: 09453-2W100)
[Using with bar (SST No.: 09231-H1100)]
09480-A3800
Inhibitor neutral fixed pin

Inhibitor neutral fixed.
09231-H1100
Bar

Installation of oil seal in the transaxle case side and the transaxle housing side.
[Using with oil seal installer (SST No.: 09453-3L241, 09453-2W100)

Specifications
Specifications ItemSpecificationsTransmission typeA6MF1Engine modelGasoline 2.0 GDITorque converter type3-element, 1-stage, 2-phase typeTorque converter sizeO236 mm (9.2913 in.)Oil pump systemPar ...

Troubleshooting
Fault Diagnosis Features a fail-safe mechanism that provides "limp-home" 4th gear hold to enable the vehicle to be driven to the owner's home or dealer shop. Fail-Safe: The TCM provides 4th ge ...

Other information:

Hyundai Tucson (LM) 2010-2015 Owners Manual: Child restraint system
WARNING Always properly restrain children in the rear seats of the vehicle. Children of all ages are safer when restrained in the rear seat. A child riding in the front passenger seat can be forcefully struck by an inflating air bag resulting in SERIOUS INJURY or DEATH. Children under age 13 ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Coolant Repair procedures
Refilling And Bleeding     Never remove the radiator cap when the engine is hot. Serious scalding could be caused by hot fluid under high pressure escaping from the radiator.     When pouring engine coolant, be sure to shut the relay box lid and not to ...

© 2010-2024 www.htmanual.net