Removal |
1. |
Remove the engine cover.
(Refer to Engine Mechanical System - "Engine cover") |
2. |
Remove the air cleaner assembly and air duct.
(Refer to Engine Mechanical System - "Air cleaner") |
3. |
Remove the battery and battery tray.
(Refer to Engine Electrical System - "Battery") |
4. |
Remove the ground line after removing the bolt (A).
|
5. |
Dissconnect the solenoid valve connector (A) and inhibitor switch connector (B). |
6. |
Remove the control cable (C) after removing the nut (A) and the bolt (B).
|
7. |
Disconnect the clip (A) from the automatic transaxle. |
8. |
Remove the wiring mounting bracket bolt (A). |
9. |
Disconnect the hose (B) after removing the automatic transaxle fluid cooler hose clamp (A). |
10. |
Remove the automatic transaxle upper mounting bolt (A-2ea) and the starter motor mounting bolt (B-2ea).
|
11. |
Remove the cowl top cover and wiper motor.
(Refer to Body Electrical System - "Windshield Wiper/Washer") |
12. |
Remove the cowl complete assembly panel (A). |
13. |
After loosening the mounting clips (A), then disconnect the fender side cover (B). |
14. |
Using the engine support fixture (Support SST No.:
09200-2S000, Beam SST No.: 09200-38001), hold the engine and transaxle
assembly safely. |
15. |
Remove the mounting bracket cover (A). |
16. |
Remove the automatic transaxle mounting bracket bolt (A).
|
17. |
Remove the automatic transaxle mounting support bracket (A).
|
18. |
Remove the under cover (A).
|
19. |
Remove the side cover (A). |
20. |
Remove the air guard (A) after removing the bolts. |
21. |
Remove the following items;
2WD
4WD
|
22. |
Remove the dust cover (A).
|
23. |
Remove the torque converter mounting bolt (A-4ea) with rotating the crankshaft.
|
24. |
Remove the automatic transaxle with a jack after removing the mounting bolt (A-1ea, B-3ea).
|
Installation |
1. |
Install in the reverse order of removal.
|
2. |
In case of the reinstallation.
|
3. |
In case of the replacing with a new automatic transaxle.
|
4. |
In case of the replacing with a remanufactured automatic transaxle.
|
Hyundai Tucson (LM) 2010-2015 Owners Manual: Fuse/Relay panel description
Instrument panel fuse panel
Inside the fuse/relay box cover, you can find the fuse/relay label describing
fuse/relay name and capacity.
✽ NOTICE
Not all fuse panel descriptions in this manual may be applicable to your vehicle;
the information is accurate at the time of printing. When yo ...
Hyundai Tucson (LM) 2010-2015 Service Manual: General Safety Information and Caution
Precautions
General Precautions
Please read the following precautions carefully before performing the airbag system service.
Observe the instructions described in this manual, or the airbags could accidentally deploy and cause damage or injuries.
•
Except when performing electrical ins ...