Hyundai Tucson: Hydraulic System / Oil Pump Description and Operation

Description
The oil pump is built-in as a single unit with the 2/6 brake chamber. Rotation of the pump builds the hydraulic pressure needed for the lubrication of the various parts of the transaxle and operation of the clutch and brakes. The oil also circulates through the torque converter and the cooler.

Oil Cooler Repair procedures
Inspection Radiator Cap Testing 1. Remove the radiator cap, wet its seal with engine coolant, and then install it on a pressure tester. 2. Apply a pressure of 93.16 ~ 122.58 kPa (0.95 ~ 1.25 ...

Oil Pump Components and Components Location
Components 1. Reaction shaft support assembly2. Oil pump housing3. Driven gear4. Drive gear5. Oil seal6. Bushing-housing7. Reaction shaft8. Bushing-reaction shaft9. Sleeve10. Flange bolt Oil P ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Components and Components Location
Components Location 1. AVN (A/V & Navigation head unit)2. Tweeter speaker3. External amplifier4. Roof antenna (GPS)5. Front door speaker6. Rear door speaker7. Subwoofer speaker8. Antenna feeder cable9. Feeder cable joint connector10. Surround speaker (Option)11. Back view camera ...

Hyundai Tucson (LM) 2010-2015 Owners Manual: Defogging logic
To reduce the possibility of fogging up the inside of the windshield, the air intake or air conditioning are controlled automatically according to certain conditions such as or position. To cancel or return to the defogging logic, perform the following steps: Manual climate control system ...

© 2010-2024 www.htmanual.net