Hyundai Tucson: Automatic Transaxle Control System / Input Speed Sensor Description and Operation

Hyundai Tucson (LM) 2010-2015 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Input Speed Sensor Description and Operation

Description

Input Speed Sensor is a vital unit that measures the rate of rotation of the input shaft inside the transmission and delivers the readings to the TCM.

The sensor provides critical input data that's used in feedback control, damper clutch control, gear setting control, line pressure control, clutch activation pressure control, and sensor fault analysis.

Transaxle Oil Temperature Sensor Repair procedures

Inspection 1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector (A). 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that ...

Input Speed Sensor Specifications

Specifications x Type: Hall effect sensor Operation condition (°C)°F((-)40~150)) -40~302Air gap (mm)in.(0.95~1.65) 0.0374~0.0649Output voltage(V)High1.18 ~ 1.68Low0.59 ~ 0.84 ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Audio Unit Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the hazard lamp switch assembly (A). Take care not to damage and scratch the hazard lamp switch assembly and its related parts. Apply the protective tapes to the hazard lamp switch assembly and its rel ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Crash Pad Repair procedures
Replacement Cluster Replacement • When prying with a flat-up screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • Put on gloves to protect your hands. 1. Using a screwdriver or remover, r ...