Inspection |
1. |
Turn ignition switch OFF. |
2. |
Disconnect the solenoid valve connector. |
3. |
Measure resistance between sensor signal terminal and sensor ground terminal. |
4. |
Check that the resistance is within the specification.
|
Removal |
1. |
Remove the air cleaner assembly and air duct.
(Refer to Engine Mechanical System - "Air cleaner") |
2. |
Remove the battery and battery tray.
(Refer to Engine Electrical System - "Battery") |
3. |
Remove the under cover.
(Refer to Engine Mechanical System - "Engine Room Under Cover") |
4. |
Remove the drain plug (A) and reinstall the drain plug after draining ATF totally.
|
5. |
Disconnect the air breather hose (A) from the valve body cover after disconnecting the clamp (B). |
6. |
Remove the valve body cover (A).
|
7. |
Remove the bolts. |
8. |
Disconnect the solenoid valve connector (B) and the oil temperature sensor (A) from the valve body.
|
9. |
Remove the solenoid valve support bracket (B) and the valve body mounting bolt (A-1ea).
|
10. |
Remove the torque converter control solenoid valve (A). |
Installation |
1. |
Install in the reverse order of removal.
|
Hyundai Tucson (LM) 2010-2015 Service Manual: Crankshaft Position Sensor (CKPS) Specifications
Specification
ItemSpecificationCoil Resistance (x)774 ~ 946 [20°C (68°F)]
...
Hyundai Tucson (LM) 2010-2015 Service Manual: ESC OFF Switch Description and Operation
Description
1.
The ESC OFF switch is for the user to turn off the ESC system.
2.
The ESC OFF lamp is on when ESC OFF switch is engaged. ...