Inspection |
1. |
Turn ignition switch OFF. |
2. |
Disconnect the solenoid valve connector. |
3. |
Measure resistance between sensor signal terminal and sensor ground terminal. |
4. |
Check that the resistance is within the specification. |
Removal |
Replacing an on/off solenoid valve (SS-A, SS-B) does not
require additional hydraulic pressure adjustment; however, the hydraulic
pressure will need to be adjusted after replacing the VFS solenoid
valve. If replacing the VFS solenoid valve; also replace the valve body
assembly.
(Refer to Hydraulic system - "Valve Body") |
Hyundai Tucson (LM) 2010-2015 Owners Manual: Care of seat belts
Seat belt systems should never be disassembled or modified. In addition, care
should be taken to assure that seat belts and belt hardware are not damaged by seat
hinges, doors or other abuse.
Periodic inspection
All seat belts should be inspected periodically for wear or damage of any kind.
...
Hyundai Tucson (LM) 2010-2015 Service Manual: Special Service Tools
Special Tools
Tool (Number and name)IllustrationUse09880-4F000Hog ring clip installerHog ring clip Installation09816-2S100Fixed glass fixture Installation the fixed glass
...