Hyundai Tucson: Automatic Transaxle Control System / Inhibitor Switch Troubleshooting
| Fault Diagnosis |
| Fault Diagnosis for Symptom |
| Major Symptom | Expected Cause | Items to Check and Measures |
| Shift lever not operating Gear not marked on cluster Shock occurs while shifting lever Warning lamp ON Engine OFF while vehicle is parked | Inhibitor switch circuit abnormal Inhibitor switch function abnormal | Check the inspection FLOW and replace the inhibitor switch |
| Inhibitor switch "N" setting faulty | Adjust "N" setting using "N" setting jig (refer to automatic transmission system - "inhibitor switch") | |
| Shift cable separation faulty | Adjust shift cable separation (refer to automatic transmission system - "inhibitor switch") | |
| Poor ground condition on reversing light circuit | Check the ground condition on reversing light and retighten it | |
| Inhibitor switch vehicle side circuit abnormal | Check the connection of junction box power terminal, fuse (TCU2) terminal and replace the junction box or adjust the gap | |
| Check inside the inhibitor switch connector for foreign substance and whether terminal is bent | ||
| Poor ground condition on inhibitor switch wire | Check the ground condition of wire and retighten it | |
| Poor inhibitor unit (disconnection/short-circuit) | Replace inhibitor switch (refer to inhibitor switch inspection) |
Inhibitor Switch Schematic Diagrams
Circuit Diagram
...
Inhibitor Switch Repair procedures
Inspection
•
Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage.
Inspection flow
Items to ch ...
Other information:
Hyundai Tucson (LM) 2010-2015 Service Manual: Input Speed Sensor Repair procedures
Inspection
1.
Check signal waveform of Input & output speed sensor using the GDS.
Specification: Refer to "Signal Wave Form" section.
Removal
1.
Remove the valve body assembly.
(Refer to Hydraulic System - "Valve Body")
2.
Disconnect the input & output speed sensor conn ...
Hyundai Tucson (LM) 2010-2015 Owners Manual: Disc brakes wear indicator
When your brake pads are worn and new pads are required, you will hear a high
pitched warning sound from your front or rear brakes. You may hear this sound come
and go or it may occur whenever you depress the brake pedal.
Please remember some driving conditions or climates may cause a brake squ ...
