Hyundai Tucson: Automatic Transaxle Control System / Shift Lever Repair procedures
| Removal |
| 1. |
Pull the knob (A) in the direction of "F" and remove it, and then remove the console upper cover.
|
| 2. |
Remove the console.
(Refer to Body - "Floor console") |
| 3. |
Disconnect the connector (A) from the shift lever.
|
| 4. |
Disconnect the shift cable (A) from the shift lever.
|
| 5. |
Remove the shift lever (A) after removing the bolts.
|
| Installation |
| 1. |
Installation is the reverse of removal.
|
Shift Lever Components and Components Location
Components
1. Shift lever knob 2. Shift lever assembly3. Shift cable4. Manual control lever5. Shift cable retainer
...
Shift Cable Components and Components Location
Components
1. Shift lever knob 2. Shift lever assembly3. Shift cable4. Manual control lever5. Shift cable retainer
...
Other information:
Hyundai Tucson (LM) 2010-2015 Owners Manual: Hazardous driving conditions
When hazardous driving conditions are encountered such as water, snow, ice, mud
or sand:
Drive cautiously and allow extra distance for braking.
Avoid sudden movements in braking or steering.
If stuck in snow, mud, or sand, use second gear. Accelerate slowly to avoid spinning
the drive wheels. ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Front Impact Sensor (FIS) Repair procedures
Removal
•
Removal of the airbag must be performed according to the precautions/ procedures described previously.
•
Before disconnecting the front impact sensor connector, disconnect the front airbag connector(s).
•
Do not turn the ignition switch ON and ...
