Hyundai Tucson: Transfer Assembly / Front Wheel Transfer Assembly Repair procedures

Hyundai Tucson (LM) 2010-2015 Service Manual / 4 Wheel Drive (4WD) System / Transfer Assembly / Front Wheel Transfer Assembly Repair procedures

Removal

Remove the following items;

A.	Sub frame assembly (Refer to Suspension System - "Sub Frame")

B.	Drive shaft assembly. (Refer to Driveshaft and axle - "Front Driveshaft ")

Remove the propeller shaft (A).

Tightening torque :

49.0~68.6N.m (5.0~7.0kgf.m, 36.2~50.6lb-ft)

3.	Loosen the transfer upper & lower mounting bolts. (transfer side > transaxle side)

4.	Loosen the transfer lower mounting blot. (transaxle side > transfer side)

Installation

Install in the reverse order of removal.

1.	Be careful not to damage the O-ring (A). If the O-ring is damaged, replace with a new one.

Smear and cover splines (B) with molybdenum type high pressure grease.

TECHLUBE MEGAMAX - ALPHA OR EQUIVALENT

3.	Install the propeller shaft to be near runout marking (Transfer assembly 1ea, propeller shaft 1ea) each other.

Front Wheel Transfer Assembly Components and Components Location

Components Location 1. Transaxle Assembly2. Transfer assembly3. Propeller shaft4. Coupling assembly ...

Oil Seal Repair procedures

Replacement [Right side] 1. Remove the driveshaft assembly. (RH side) (Refer to Driveshaft and axle - "Front Driveshaft ") 2. Remove the dust cover (A). 3. Remove the oil seal (A, B). ...

Other information:

Hyundai Tucson (LM) 2010-2015 Owners Manual: Driving in the rain
Rain and wet roads can make driving dangerous. Here are a few things to consider when driving in the rain or on slick pavement: Slow down and allow extra following distance. A heavy rainfall makes it harder to see and increases the distance needed to stop your vehicle. Turn OFF your C ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Smart Key Repair procedures
Smart Key Smart Key Code Saving 1. Connect the DLC cable of GDS to the data link connector (16 pins) in driver side crash pad lower panel, turn the power on GDS. 2. Select the vehicle model and then do "Smart key code saving". 3. After selecting "Smart key teaching" menu, push "Enter" k ...