Inspection |
All units are filled up with coupling fluid (ultra-low
viscosity ATF) prior to shipping. Inspection, fill-up, and replacement
of coupling fluid is therefore not necessary (zero maintenance, lifetime
fluid).
|
Removal |
Coupling Maintenance Precautions
Maintain the coupling at a horizontal level.
|
1. |
Remove the 4WD coupling assembly bolts (A-3ea) mounted to the rear propeller shaft (B).
|
2. |
Using a flat tool, separate the propellar shaft from 4WD coupling assembly. |
3. |
Disconnect the pressure sensor connector (A) and Oil hydraulic Motor connector (B). |
4. |
Loosen the coupling assembly mounting bolts (A-4ea).
|
5. |
Using a flat tool, separate the 4WD coupling assembly from the rear differential carrier assembly. |
Installation |
1. |
Install in the reverse order of removal.
|
2. |
After replacing the coupling, reset the 4WD ECU's clutch learing using the GDS tool.
(Refer to 4WD Control System - "Adjustment") |
Hyundai Tucson (LM) 2010-2015 Owners Manual: Child-protector rear door locks
The child safety lock is provided to help prevent children seated in the rear
from accidentally opening the rear doors. The rear door safety locks should be used
whenever children are in the vehicle.
The child safety lock is located on the edge of each rear door. When the child
safety loc ...
Hyundai Tucson (LM) 2010-2015 Owners Manual: Sound Settings
Press the key
Select [Sound] through
TUNE knob or
key
Select menu through
TUNE knob
Sound Settings
This menu allows you to set the ‘Bass, Middle, Treble’ and the Sound Fader and
Balance.
Select [Sound Settings] Select menu
through TUNE knob
Turn
T ...