Removal |
|
1. |
Remove the Front Driveshaft.
(Refer to Driveshaft Assembly - “Front Driveshaft”) |
2. |
Remove the housing circlip (B) from the driveshaft spline (A). |
3. |
Remove both boot bands from the TJ housing. |
4. |
Remove the TJ housing (A).
|
5. |
Remove the retainer ring (A) from the shaft. |
6. |
Remove the spider assembly (B) from the driveshaft (A) using the special tool (09495-33000). |
7. |
Clean the spider assembly. |
8. |
Remove the TJ boot (A).
|
Inspection |
1. |
Check the spider assembly for roller rotation, wear or corrosion. |
2. |
Check the groove inside the joint case for wear or corrosion |
3. |
Check the TJ boots for damage and deterioration. |
Installation |
1. |
Wrap tape around the driveshaft spline(TJ) to prevent damage to the boot. |
2. |
Using the alignment marks (D) made during disassembly as a
guide, install the spider assembly (A) and retainer ring (B) on the
driveshaft splines (C). |
3. |
Add specified grease to the joint boot as much as it was wiped away at inspection. |
4. |
Install the both boot band. |
5. |
Using the SST(09495-3K000), secure the TJ boot bands.
|
6. |
Install the front driveshaft.
(Refer to Driveshaft Assembly - “Front Driveshaft”) |
7. |
Check the front alignment.
(Refer to Suspension System - "Front Alignment") |
Hyundai Tucson (LM) 2010-2015 Owners Manual: ESC OFF usage
When driving
The ESC OFF mode should only be used briefly to help free the vehicle if stuck
in snow or mud by temporarily stopping operation of the ESC to maintain wheel torque.
To turn ESC off while driving, press the ESC OFF button while driving on a flat
road surface.
CAUTION
To prevent d ...
Hyundai Tucson (LM) 2010-2015 Owners Manual: Radio mode
Basic Mode Screen
1. Mode Display Displays currently operating mode.
2. Frequency Displays the current frequency.
3. Preset Displays current preset number [1] ~[6].
4. Preset Display Displays preset buttons.
5. Info Displays broadcast information.
6. A.store Automatically saves frequencies ...